D1213A-01LP4 document number: ds35760 rev. 5 - 2 1 of 4 www.diodes.com august 2012 ? diodes incorporated d1213 a -01lp4 new product 1 channel low capacitance tvs diode array features ? iec 61000-4-2 (esd): air 15kv, contact 8kv ? 1 channel of esd protection ? low channel input capacitance of 0.85pf typical ? ultra-low profile (0.4mm max) leadless surface mount package suitable for compact portable electronics ? typically used at high speed ports such as usb 2.0, ieee1394, serial ata, dvi, hdmi, pci ? totally lead-free & fully rohs compliant (notes 1 & 2) ? halogen and antimony free. ?green? device (note 3) ? qualified to aec-q101 standards for high reliability mechanical data ? case: x2-dfn1006-2 ? case material: molded plastic, "green" molding compound. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: nipdau over copper leadframe. solderable per mil- std-202, method 208 ? weight: 0.001 grams (approximate) ordering information (note 4) part number case packaging D1213A-01LP4-7b x2-dfn1006-2 10,000/tape & reel notes: 1. no purposely added lead. fully eu directiv e 2002/95/ec (rohs) & 2011/6 5/eu (rohs 2) compliant. 2. see http://www.diodes.com for more in formation about diodes incorpor ated?s definitions of halogen- and antimony-free, "gree n" and lead-free. ? 3. halogen- and antimony-free "green? products are defined as those which contain <900ppm br omine, <900ppm chlorine (<1500ppm t otal br + cl) and <1000ppm antimony compounds. 4. for packaging details, go to our website at http://www.diodes.com. marking information device schematic x2-dfn1006-2 bottom view u1 = product type marking code line denotes pin 1 pin 1 pin 2 u1 e4
D1213A-01LP4 document number: ds35760 rev. 5 - 2 2 of 4 www.diodes.com august 2012 ? diodes incorporated d1213 a -01lp4 new product maximum ratings (@t a = +25c, unless otherwise specified.) characteristic symbol value unit conditions peak pulse current i pp 5 a 8/20 s, per figure 2 esd protection ? contact discharge v esd _ contac t 8 kv standard iec 61000-4-2 esd protection ? air discharge v esd _ ai r 15 kv standard iec 61000-4-2 thermal characteristics characteristic symbol value unit package power dissipation (note 5) p d 250 mw thermal resistance, junction to ambient (note 5) r ja 500 c/w operating and storage temperature range t j , t stg -65 to +150 c electrical characteristics (@t a = +25c, unless otherwise specified.) characteristic symbol min typ max unit test conditions reverse working voltage v rwm ? ? 3.3 v ? reverse current (note 6) i r ? 0.1 1.0 a v r = v rwm = 3.3v reverse breakdown voltage v br 6.0 ? ? v i r = 1ma forward voltage v f 0.6 0.8 0.95 v i f = 8ma reverse clamping voltage, positive transients v cl1 ? 10.0 ? v i pp = 1a, t p = 8/20 s reverse clamping voltage, negative transients v cl2 ? -1.7 ? v i pp = -1a, t p = 8/20 s dynamic resistance r dyn ? 0.9 ? ? i r = 1a, t p = 8/20 s capacitance c t ? 0.85 1.2 pf v r = 1.65v, f = 1mhz notes: 5. device mounted on fr-4 pcb pad layout (2oz copper) as shown on diodes, inc. suggeste d pad layout ap02001, which can b e found on our website at http://www.diodes.com. 6. short duration pulse test used to minimize self-heating effect. 0 25 50 75 100 125 150 175 200 100 75 50 25 0 t , ambient temperature (c) fig. 1 pulse derating curve a p eak p u lse de r a t in g in % o f peak power or current 0 t, time ( s) fig. 2 pulse waveform 20 40 60 100 50 0 i , peak pulse current (%i ) pp p p
D1213A-01LP4 document number: ds35760 rev. 5 - 2 3 of 4 www.diodes.com august 2012 ? diodes incorporated d1213 a -01lp4 new product 0.2 0.4 0.6 0.8 1.0 1.2 0.001 0.01 0.1 1 10 100 i, i n s t a n t a n e o u s f o r wa r d c u r r e n t (ma) f 1,000 fig. 3 typical forward characteristics v , instantaneous forward voltage (v) f t = 25c a t = -55c a t = 85c a t = 125c a t = 150c a 0 1.0 2.0 3.0 4.0 5.0 fig. 4 typical reverse characteristics v , instantaneous reverse voltage (v) r 100 10 0.1 i , ins t an t ane o u s r eve r se c u r r en t (na) r 1 t = 25c a t = -55c a t = 85c a t = 125c a t = 150c a 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 v , reverse voltage (v) fig. typical total capacitance vs. reverse voltage r 5 0.5 1.5 0 1.0 2.0 c , t o t al c a p a c i t an c e (p f ) t f = 1mhz package outline dimensions x2-dfn1006-2 dim min max typ a 0.34 0.4 0.37 a1 0 0.05 0.03 b 0.45 0.55 0.50 d 0.95 1.075 1.00 e 0.55 0.675 0.60 e ? ? 0.40 l 0.20 0.30 0.25 r 0.05 0.15 0.10 all dimensions in mm l e b r e d a1 a
D1213A-01LP4 document number: ds35760 rev. 5 - 2 4 of 4 www.diodes.com august 2012 ? diodes incorporated d1213 a -01lp4 new product suggested pad layout important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability arising out of the application or use of this document or an y product described herein; neither does di odes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. life support diodes incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2012, diodes incorporated www.diodes.com dimensions value (in mm) z 1.1 g 0.3 x 0.7 y 0.4 c 0.7 z x c g y
|
